MDMA Synthesis From PMK

MDMA Synthesis From PMK (MDP2P)

Introduction

The following method shows that the NaBH4 reduction actually is superior to all other common routes used in clandestine chemistry and this method allows to scale MDMA synthesis unlike aluminum amalgam reduction. The method is quite simple, it doesn't take expensive equipment. Procedures with the reaction mixture are simple and efficient. This method is very usefull for big scale production of MDMA and gives high yields (90%+).

There is a relatively fast formation of the imine and the imine is reduced rapidly. There's no reduction of the ketone to the secundary alcohol. In similar reactions, the water that is produced during the forming of the imine (Schiff Base) is removed from the reaction before the imine is reduced with drying salt, or molecular sieves, or by using toluene as the solvent, so the water and the toluene form an azeotrope.

Difficulty rating: 5/10

Reagents:

  • Methylamine gas (MeNH2) 300 g;
  • Methanol (MeOH) 3000 g;
  • 3,4-Methylenedioxyphenylpropan-2-one (MDP2P; PMK; cas 4676-39-5) 1000 g;
  • Sodium borohydride (NaBH4) 100 g;
  • Distilled water (H2O) 8 L;
  • Hydrochloric acid 8 mL 33% HCl;
  • Dichloromethane (DCM) 200 mL;
  • Acetone 4 L;
  • Sodium hydroxide aq solution 30% (NaOH aq) 200 mL;

Equipment and glassware:

  • Reactor 20 L, equipped with thermomether and overhead stirrer;
  • Freezer;
  • Retort stand and clamp for securing apparatus;
  • Syringe or Pasteur pipette;
  • pH indicator papers;
  • Beakers (2 L x2, 1 L, 500 mL x2);
  • Bucket 20-30 L;
  • Vacuum source;
  • Laboratory scale (1-1000 g is suitable);
  • Measuring cylinders 1000 mL and 100 mL;
  • Cold water bath;
  • Glass rod and spatula;
  • Laboratory grade thermometer;
  • Buchner flask and funnel;
  • Filter paper;
  • Wet towel;
  • Vacuum distillation kit;
  • HCl gas source;
  • Hose (optional);
  • Heating plate or heating mantle;

Procedures

Reagents preparation

Methylamine gas (MeNH2) 300 g is dissolved in chilled 3000 g methanol (MeOH; -17-20 °C) in 20 L reactor, equipped with thermomether and overhead stirrer. The mixture is cooled down to 5 °C. The stirrer is turned on and MDP2P 1000 g is added.

Notes: Methylamine (MeNH2) gas 300 g is made by reaction of methylamine hydrochloride (MeNH2*HCl) with sodium hydroxide (NaOH).

PMK Reduction to MDMA

Sodium borohydride (NaBH4) 100 g is added in portions, one teaspoon per ~5 min, H2 gas bubbling has to disappear before next addition (wash down with methanol). Temperature is maintain between 8-10 °C. Sodium borohydride (NaBH4) addition is taken 2-7 h. The mixture is stirred for 2 days. The stirring time can be reduced to 4 h for people in a hurry, 10-20% will be lost.

Notes: When the reaction vessel is opened it should be covered by a wet towel, so that the methylamine gas can be absorbed by the water. 1 L Water can absorb 1000 L NH3 gas. An airlock can be used for that goal as well. Do not airtight the flask, let a thin hose out the window (or a fume hood), wrapped at the end with a wet towel.

Distilled water (H2O) 8 L with 8 mL 33% HCl is added to the reaction mixture with a constant stirring. Reaction mixture is turned to greenish brown color, pH 10.5 (11 is better than 10). When green soap is started to form, it means that you've added far too much HCl. MDMA free base will settle on a reaction vessel bottom. Organic layer is drained out (separated).

DCM 200 mL is added to the reaction vessel with water layer and the mixture is stirred for 10 min. The stirrer is stopped and reaction mixture is left 30 min. DCM with the rest MDMA freebase will settle on the vessel bottom. Organic layer is drained out and extracts are combined. There is ~1750 mL of MDMA free base and DCM.

Notes: You can basify the water layer again with conc. NaOH solution to pH 13-14 and drain out MDMA free base residue again.

Purification

A vacuum distillation setup is prepared. Methanol, DCM, water and other low boiloing substances are distilled off at 130 °C firstly. Then, a heater is set at 165 °C, little drops of MDMA oil are condensated and seen around 140-145 °C; at 160-165 °C (20-18 mbar) MDMA oil is distilled intensively. The clean MDMA free base distillation yield is ~ 1.0 L.

A membrane vacuum aspirator is sufficient to distill off water, methanol and other low boiling substannces from the reaction mixture. A decent vacuum pump is recommended to distill MDMA free base.

 

Crystallization

MDMA free base is mixed with clean, cold (-10 to -20 C), dry acetone 1:4, dry HCl gas is bubbled through this solution to reach pH 7-6.5. It have to be done carefully. A thick, white crystal mass will be formed after ~5 min bubling. pH Have to be checked frequently with pH-meter or indicator paper. If the solution become hot, place it into a big freezer to cool it down and continue with a next cold batch. Be very carefull and don't drop pH below 7 to 6.5 because MDMA*HCl crystalls will dissolve again. In this case, you have to add NaOH base solution again until pH rise up to 7. At least 200 mL base have to be kept ready for spare case of mistakes. The acetone/powder mix is filtred and dried on Buechner funnel with aspirator vacuum. Then, MDMA*HCl is dried again on a Pyrex dish under A/C or a slow blowing fan flow in a dry room.

Bibliography

Gallagher, Ryan, Ronald Shimmon, and Andrew M. McDonagh. "Synthesis and impurity profiling of MDMA prepared from commonly available starting materials." Forensic science international 223.1-3 (2012): 306-313. https://www.sciencedirect.com/science/article/abs/pii/S0379073812004604

Heather, Erin. The Synthesis and Chemical Profiling of 3, 4-Methylene-Dioxymethamphetamine (MDMA) and Analogues. Diss. University of Technology Sydney (Australia), 2020. https://search.proquest.com/openview/6196f26325adbfdb0055d603833b43ef/1?pq-origsite=gscholar&cbl=2026366&diss=y

  1. K

    Can i make MDMA with medication like Vyvanse or ritalin or adderal?

    Question 
    I have access to medication like modafenil vyvanse adderal and have experience in making edibales and vape thc cartridges , know i am interested to making MDMA or ectasy or pink cocaine , dose any one could help me. is it possible ? as a business man in cannabis field, i am curious can i make...
  2. hustlerkid

    Need Canadians to sample our MDMA!

    MDMA 
    Our newest listing of 100% pure Light Purple MDMA is live. We are searching for 10 active members of the bb community to sample our product. You will receive a 500mg sample in exchange for a review. Product link...
  3. M

    Help! MDMA super Saturated in acetone

    Question 
    Hi crew How do you go about fixing MDMA that was super saturated in acetone ? Ph level is still 5.5 thank you
  4. M

    Piperonal to Isasfrol

    Question 
    Hello, swim have Piperonal but no nitromethane so is ist Possible to reduce piperonal to Isosafrol just simple like fe/hcl? And the other question how can i make formamid from Urea (like Adblue)? Thank you have a nice day
  5. J

    MDP2P From PMK Glycidate

    I have been out of the game for years.. i ran a operation for a while that i did 250g batches using Al/Hg method. I have made mdp2p all the way from shaving sass root bark until i discovered PMK glycidate. BIG game changer lol. Anyways ive found myseld getting back into the action again and have...
  6. CerealChem

    MAPS gCMP MDMA Synthesis

    Hello, I'm interested in trying the MAPS gCMP MDMA synthesis and was wondering if anyone else has tried it before or what others general opinions on the synthesis are. I haven't seen much talk about the synthesis itself, but I have heard that it makes a very pure end product. Thanks MAPS...
  7. Mr Good Cat

    How stable if freebase at RT?

    I'm thinking about some new methods of manufacturing and delivery. Mostly my interest is in the realm of amph group: mdma, meth, amph etc. If I'm not confused, bases of all this group react with CO2 in the air. That means, if the storage vessel is hermetically closed, there shall not be any...
  8. H

    💗HELP ME FIND MY LONG LOST LOVE!❤️

    Question 
    It's been 20 years since I last had ecstacy, would love to do it again. All my searches turned up empty. Plenty of meth and fatty, but yuck. Sick of it. I would love to find some real x or molly. Help me find anyone, I'm patient
  9. A

    MUST READ !! STOP USEING BOHEMIA !!

    MUST READ !! STOP USEING BOHEMIA !! Honestly, I'm a big buyer on Bohemia and Cannabia, I think they want to exit scam slowly and continue to rake in a little more money before they leave. I see a lot of messages from sellers and customers who deposit but cannot withdraw, I will be moving to...
  10. Mr Good Cat

    MDMA isomers separation - working routes

    Here I suggest to gather all MDMA isomers separation working method. And first one is I've just finished. First of all, I don't want to say it is perfect method. I'm also nor sure about final yeld, as I was in a hurry. Probably if I would kept precipitates in the freezer longer, the yeld would...
  11. Mr Good Cat

    Hydrochloride crystallization issue - water trapped in crystals

    Normally I crystallize "stuff" in oversaturated water solution, and crystallization takes around 48 hours. I allways control exact weight of "stuff", solution and water. It means, when crystals are ready, final yeld, including the yeld from water leftovers fits with initial "stuff" weight minus...
  12. B

    mdma synthesys question

    Question 
    I made method MDMA I'm having difficulty beating reagent, lay in chemistry first attempts, my formula with mercurium not nabh I'm missing something someone knows some explanatory video or other recipes but specific
  13. A

    how much PMK ethyl glycidate (CAS: 28578-16-7) is required to obtain 1 liter of PMK (CAS: 4676-39-5)?

    Question 
    and with 1 liter of PMK, how much MDMA can be obtained? Thank you, all!! :)
  14. G

    Safrole/Sassafras Oil sources / vendors?

    Question 
    Or any other way to synth MDMA without Safrole?
  15. Zarder

    28578-16-7 banned soon?

    Question 
    Hello. I got word that this PMK as well as BMK 5449 will be banned soon in China. Does anyone else have reports of this (I don’t care for rumors, I want reports from China)?
  16. B

    pills ecstasy

    Question 
    what can I mix in my ecstasy pill, always use mda or methamphetamine but the values are out of the market some products but cheap someone knows I bought mdbd and pentylone powder did not make any effect from china do not know if I bought the wrong product I am looking for something that can help me
  17. M

    can i make PMK ethyl glycidate CAS 28578-16-7 in too MDMA if so. How?

    Question 
    hey i reacently came accross a good deal for some PMK, i am very new too this wold and would like too get in too making my own MDMA is this possible whit PMK ethyl glycidate CAS 28578-16-7 and if so dus anyone have some guide/ intrustions thanks evryone!
  18. Chem-Safe

    Reports

    MDMA, amphetamine and cocaine markets in Spain (2022) Main Conclusions In general terms, it is confirmed that the Spanish markets for MDMA, amphetamine and cocaine reflect the global dynamics observed in other European countries, such as, for example, the increase in MDMA doses in tablets, the...
  19. P

    Theoretical investigation: Baylis-Hillman PEA synthesis via Oxazolidone/Oxazolone intermediates

    Introduction: A certain vendor online (that shall not be named) appears to be suggesting a "novel" route to phenethylamines. The reaction from aldehyde to amine occurs in 3 distinct steps: 1) A Baylis-Hillman reaction is first used to couple an aryl aldehyde with acrylamide using a tertiary...
  20. J

    PMK ethyl vs PMK methyl glycidate

    Question 
    I’m just a little confused here, I know the difference between BMK and PMK glycidates but dont know the difference between PMK methyl and PMK ethyl glycidate. Can someone please explain the difference and which one is more suitable for MDMA production? Thanks
  • Free product samples

    Testing products from new vendors and manufacturers.

    Get free samples for testing now!

  • Always stay in touch with BB forum. Element/Matrix.

    Connect notifications to always stay in touch with the forum!

    Connect

  • The BB Forum team is looking for cooperation:

    • Traffic arbitrage specialists
    • Spammers
    • Advertising agencies
    • Bloggers/Vloggers
    • TOR sites directories
    • Creative people who can create viral content
    • Administrators of Telegram Channels and Groups

      We will pay more for your traffic than our competitors! $0.1 per visitor!!!If you are interested in, write to the administrator.
Top