Do you need to add acetone to salt it at the end? Is it not possible to salt it right from the IPA?
Warning! You are currently using a domain is accessible on the regular internet, not on Tor. For better privacy and security, please use our onion domain instead.
One-pot Amphetamine Synthesis From P2NP With NaBH4/CuCl2 (1kg scale)
- Thread starter GhostChemist
- Start date
Hi , please can anyone provide small scale, synthesis procedure for this , i have 100grms of p2np
after checking, my window might not be suitable for getting rid of the h2 gas via a pipe. is there any other safe way of venting the h2 gas? (i don't yet have an inline filter).
Get the filter 
↑View previous replies…
Consult your local grow shop to help you, they will surely figure everything out for your needs!
Just tell them you are working with synthetic cannabinoids, which will make it more likely for them to help you
Just tell them you are working with synthetic cannabinoids, which will make it more likely for them to help you
- By mithyl2
ha, ok.
what sort of indoor lab setup is best for h2 gas when using a duct with a fan and filter? originally (in the absence of a filter) i was going to have a ptfe pipe through my window, outletting the h2 and have a fan blowing behind it towards the window.
i have a tent, but i don't want to burn alive in there because of a small h2 leak that gathers at the top, since i'll be in there for 6 hours while i'm adding the p2np. the same risk is present with doing it in a room.
what sort of indoor lab setup is best for h2 gas when using a duct with a fan and filter? originally (in the absence of a filter) i was going to have a ptfe pipe through my window, outletting the h2 and have a fan blowing behind it towards the window.
i have a tent, but i don't want to burn alive in there because of a small h2 leak that gathers at the top, since i'll be in there for 6 hours while i'm adding the p2np. the same risk is present with doing it in a room.
If you are cooking in a tent, make sure to have a propper ventilation. Additionally place vents inside too, small ones for cannabis growing.
Make sure to also have fresh air access for circulation
The mask will be what makes the difference for your health, I can recommend the Draeger X-Plore series, maybe the 4500 or 5500 model
Make sure to also have fresh air access for circulation
The mask will be what makes the difference for your health, I can recommend the Draeger X-Plore series, maybe the 4500 or 5500 model
I have a growtent with an active carbon filtration system As for the cooling I simply place my 20L RBF in a big ass water bucket (100L or so) that I will a little less than the height of the RM (also adding some icecubes helps). I also have lights that I can move around and cannabis vents (small) that I can move around like I need them.
The tent is 2x2 and is used for synthesis, extractions, evaporations and crystalization
As for the cooling I simply place my 20L RBF in a big ass water bucket (100L or so) that I will a little less than the height of the RM (also adding some icecubes helps). I also have lights that I can move around and cannabis vents (small) that I can move around like I need them.The tent is 2x2 and is used for synthesis, extractions, evaporations and crystalization
- By mithyl2
have there ever been any problems with h2 leaks? and if the h2 gets outside of the tent then couldn't it cause an explosion in the room the tent is in?
and aren't the lights a hazard? because the heat from them could cause an explosion if there's any residual h2 in the tent that hasn't been sucked up by the filter
and aren't the lights a hazard? because the heat from them could cause an explosion if there's any residual h2 in the tent that hasn't been sucked up by the filter
Actually not, I do not work with open flames and I also don't work with vacuum destillations.
The risk of an explosion in my lab is very small.
I use lights that produce light but no heat
The risk of an explosion in my lab is very small.
I use lights that produce light but no heat
is the h2 gas only produced wen you add the sodium borohydride? or as you add the p2np?
I do not know that actually It is good that you try to deal with security and risks beforehand!
Anyway, I have cared for a secure mask + propper ventilation and then just started with it It will be important to have a circulation in your tent to also receive new fresh air
It is good that you try to deal with security and risks beforehand!Anyway, I have cared for a secure mask + propper ventilation and then just started with it
It will be important to have a circulation in your tent to also receive new fresh air do you have a second fan inputting air from the outside into the tent as well?
i need to get this synthesis done and write up my report for it ASAP, but i don't want to injure myself or worse... it's really frustrating having to be this pedantic when I just want to get on with the synthesis haha.
i need to get this synthesis done and write up my report for it ASAP, but i don't want to injure myself or worse... it's really frustrating having to be this pedantic when I just want to get on with the synthesis haha.
I have one fan inside the tent, blowing the air out and was working in generally quite good ventilated conditions so that was not needed, it would be benefitial depending on your conditions
It is not that complicated actually dude. Working with a propper mask + ventilation and you will be fine
It is not that complicated actually dude. Working with a propper mask + ventilation and you will be fine
Just did my first synthesis using this method with a 45% yield on 5g of P2NP.
this was my absolute first time so I’m sure I made some mistakes along the way, but I just wanted some experience. Ended up having a very fun time. Totally found my new hobby here. Can’t wait to get into some more experiments and improving on my techniques.
much love to those who run this site, I wouldn’t have been able to do this without the visual aids, helped fill in a big gap in my knowledge just watching the videos.
this was my absolute first time so I’m sure I made some mistakes along the way, but I just wanted some experience. Ended up having a very fun time. Totally found my new hobby here. Can’t wait to get into some more experiments and improving on my techniques.
much love to those who run this site, I wouldn’t have been able to do this without the visual aids, helped fill in a big gap in my knowledge just watching the videos.
- By mithyl2
awesome!
sorry to keep on about this, but what did you do for your air filtration to deal with the hydrogen gas?
sorry to keep on about this, but what did you do for your air filtration to deal with the hydrogen gas?
- By InLikeFlynn
I had my set up right by the opening of a doorway to the outside and a larger box fan pulling air from my work area out the door way.
Probably not the most effective or airtight way (like a fume hood) but I did see the vapor fumes from my reflux condenser being sucked through my fan and into the outside air. For smaller experiments, it does seem to be effective though.
Another idea I had before this was to put some sort of hose adaptor on the top of my reflux condenser and attach a vent hose to the outside that way.
I will be building a fume hood in the coming months as I’d like to have a more proper setup and I would just recommend building one as well if you’re at all paranoid about this.
Probably not the most effective or airtight way (like a fume hood) but I did see the vapor fumes from my reflux condenser being sucked through my fan and into the outside air. For smaller experiments, it does seem to be effective though.
Another idea I had before this was to put some sort of hose adaptor on the top of my reflux condenser and attach a vent hose to the outside that way.
I will be building a fume hood in the coming months as I’d like to have a more proper setup and I would just recommend building one as well if you’re at all paranoid about this.
- By mithyl2
yes i was going to use a hose leading from my flask to the outside of a window with a fan blowing behind it.
what type of motor does your box fan use?
to begin with i'll be doing a synth using 10g p2np. how much hdydrogen gas do you estimate is produced with a synthesis of this size?
what type of motor does your box fan use?
to begin with i'll be doing a synth using 10g p2np. how much hdydrogen gas do you estimate is produced with a synthesis of this size?