Mercury(II) nitrate synthesis with subsequent Al/Hg producing. Video manual.

HIGGS BOSSON

Expert
Joined
Jul 5, 2021
Messages
485
Reaction score
715
Points
93
Mercury(II) nitrate is used in some syntheses, such as aluminum amalgam amphetamine synthesis, to reduce phenylnitropropenes and phenylnitrostyrenes. Mercury salts are controlled substances to purchase in some countries. If there is a problem to buy Mercury(II) nitrate, you can synthesize it by yourself. It takes a mercury thermometer and concentrated nitric acid (67-70%) only. The mercury(II) nitrate synthesis is shown in following video from these components. Then, it is used for aluminum amalgam production, which is used for 1-phenyl-2-nitropropene reduce to amphetamine.​
Video description:
0:06-0:40 - Mercury is extracted from a mercury thermometer;
0:45-1:45 - Concentrated nitric acid (HNO3 67-70%) is added;
1:45-2:00 - Mercury is reacted with nitric acid and formed mercury(II) nitrate Hg(NO3)2. Nitrogen(IV) oxide (NO2) is released during reaction as brown gas and water.
2:15-4:00 - A cut Al foil 12 g is amalgamated by prepared mercury(II) nitrate solution.
4:10-5:55 - A solution 1-Phenyl-2-nitropropene 10 g in IPA with acetic acid is reduced by
Al amalgam to amphetamine.​
 
Last edited by a moderator:

billy

Don't buy from me
New Member
Joined
Feb 28, 2022
Messages
5
Reaction score
0
Points
1
so the final solution shown in the video has , al still in it are we simply takiing the al out and using the rest of the solution as are nitrate ???
 

MadHatter

Don't buy from me
Resident
Joined
Dec 4, 2021
Messages
442
Solutions
1
Reaction score
425
Points
63
Great stuff, thanks! So after reacting the mercury, how would one go about isolating the mercury salt from the solution if you wanted to save it for later? Boiling off the nitric acid?
 
Joined
Jul 25, 2021
Messages
195
Reaction score
312
Points
63
If dry mercury nitrate is needed, the mercury nitrate solution must be cooled until crystals fall out, filtered, and dried.
 
Last edited:
Joined
Jul 25, 2021
Messages
195
Reaction score
312
Points
63
Reuse of mercury nitrate solution in water is not possible. Mercury nitrate is hydrolyzed .
 

uselessdragon

Don't buy from me
New Member
Joined
Mar 17, 2022
Messages
5
Reaction score
1
Points
1
Is nitric acid a readily available substance for purchase? Or is it more easily acquired via darkweb resources?
 

HIGGS BOSSON

Expert
Joined
Jul 5, 2021
Messages
485
Reaction score
715
Points
93
Nitric acid is not a precursor and is fairly easy to buy.
 

MadHatter

Don't buy from me
Resident
Joined
Dec 4, 2021
Messages
442
Solutions
1
Reaction score
425
Points
63
I guess it depends on where you are. In the EU, nitric acid is a listed chemical and cant be bought without an end user license. Neither can you buy sulphuric acid. But you can make nitric acid if you first manage to get sulphuric acid, quite easily.
 

uselessdragon

Don't buy from me
New Member
Joined
Mar 17, 2022
Messages
5
Reaction score
1
Points
1
What sort of stores can this be found in. I am in Canada and don't seem to find many details online about its availability
 

MadHatter

Don't buy from me
Resident
Joined
Dec 4, 2021
Messages
442
Solutions
1
Reaction score
425
Points
63
Here is the legislation in your country. I cant find nitric acid there, but sulphuric acid is listed as a Class B precursor. Along with things like acetone, MEK, toluene and ether.
https://laws-lois.justice.gc.ca/eng/acts/C-38.8/ (clearnet)
 

Montecristo

Don't buy from me
New Member
Joined
Dec 29, 2021
Messages
102
Reaction score
35
Points
18
any other acids i can use? nitric is another restricted chem here
 

MadHatter

Don't buy from me
Resident
Joined
Dec 4, 2021
Messages
442
Solutions
1
Reaction score
425
Points
63
You need the nitric acid to nitrate mercury. If you can't get it, make it. If nitric acid is restricted then sulphuric acid is probably restricted too, but there's always ways. Get sulphuric acid from car batteries, boil it down and then distill it. You'll find hundreds of videos on Youtube on how to do this. Once you have concentrated sulphuric acid you can make nitric acid- you'll find about as many videos on this on Youtube too.
If you do proper research you can sometimes find nitric acid in lower concentrations in products not labelled "nitric acid". I found it in PH adjustment liquids for home growing kits, for example (although that has been changed to phosphoric acid now).
OR you could try making a nitrating mixture using ammonium nitrate and sulphuric acid. You'll find videos on this on ... well, I think you should get it by now. Otherwise, just give it up. Then this is not for you. You will have to dig up information by yourself too, noone will be able to spoonfeed you every single detail.
 
Last edited:

MadHatter

Don't buy from me
Resident
Joined
Dec 4, 2021
Messages
442
Solutions
1
Reaction score
425
Points
63
I have a question though: what would happen i you react the mercury nitrate with aluminium powder? Too violent? I have some fine german dark alu powder from my pyro days ...
 

Morpheus

Don't buy from me
New Member
Joined
Mar 28, 2022
Messages
3
Reaction score
0
Points
1
I can't watch the video :(

Any clever solutions for stirring? overhead is preferable. Electric drill mounted high up, pp paddle with a looong shaft n tight hole? really tight on the shaft to prevent distil escape? with condenser of course...or is a nice loooong pp hose sufficient? Talkin bout mdma al/hg without nitro. Is a overhead stirrer stainless steal with high corrosion resistance ok? I guess not. Most reaction vessels I see it looks liek they have some stainless steal parts, like the stirrer. 25-50L could be nice...but do they work. Just doing a synth rendering in my brain to see if its anything I should read more into. I would like some good ideas for diy large reaction vessels...or is it better to just buy a glass one premade?
 
Last edited:

Loooow

Don't buy from me
New Member
Joined
Mar 30, 2022
Messages
34
Reaction score
9
Points
8
Synthesize nitric acid yourself!

Synthesis: 80g potassium nitrate in a round bottom flask together with 250ml 98% sulfuric acid.
Connect the distillation bridge and let everything boil.
The distillate will be your
high quality HNO3! (You should dilute it a little bit with distilled water, because it will be
water, because the distillate is azeotropic HNO3, which, despite its highest possible concentration
which, despite its highest possible concentration, apparently reacts more slowly than somewhat diluted
HNO3.)
 

billy

Don't buy from me
New Member
Joined
Feb 28, 2022
Messages
5
Reaction score
0
Points
1
sorry why would this be neccersary , if we already had sulfuric acid would it not be easier just to use this.
 

G.Patton

Expert
Joined
Jul 5, 2021
Messages
2,712
Solutions
3
Reaction score
2,868
Points
113
Deals
1
Mercury sulphate (HgSO4) is extremely dangerous and hard to handle substance.
 

Loooow

Don't buy from me
New Member
Joined
Mar 30, 2022
Messages
34
Reaction score
9
Points
8

Loooow

Don't buy from me
New Member
Joined
Mar 30, 2022
Messages
34
Reaction score
9
Points
8
Better not do that.... I'm not a chemist but I'm sure that's not a good idea!!!!
 
Top